[AT] IH cub

bwhdon acton at onramp.bz
Mon Jun 14 20:23:00 PDT 2004


Walt,

It doesn't make the noise when the clutch pedal in pushed in, I don't need
to put a long handled screw driver, I use a wood shaft the sound is better,
and it doesn't sound like it come from the bell housing area, its one of the
bearings as it goes through the trans and goes into the pto.

Don


----- Original Message -----
From: "George Willer" <gwill at toast.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Monday, June 14, 2004 8:05 AM
Subject: Re: [AT] IH cub


> Pay attention, Walt!
>
> It only makes the noise when the pilot *bushing* and shaft are NOT moving
in
> relation to each other.
>
> George Willer
>
> ----- Original Message -----
> From: <DAVIESW739 at aol.com>
> To: <at at lists.antique-tractor.com>
> Sent: Monday, June 14, 2004 9:58 AM
> Subject: Re: [AT] IH cub
>
>
> > Sounds like the pilot bearing does it have  a  bearing or a bushing in
the
> > cub. If its a bearing then check that by  listening near the flywheel
> cover with
> > a long handle screw driver pressed  against the ear and touching
different
> > parts of the tractor around the noise.
> >
> > Walt Davies
> > Cooper Hollow Farm
> > Monmouth, OR 97361
> > 503 623-0460
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>





More information about the AT mailing list