[AT] Cummins Industrial Tools?

[Frank]

very good idea! 
thank you !

Frank
gremaux at tein.net
Central Montana
www.angelfire.com/mt/deeregp/index.html
----- Original Message ----- 
From: "Danny Tabor" <dannytabor2000 at yahoo.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, June 09, 2004 2:35 PM
Subject: Re: [AT] Cummins Industrial Tools?


> Just a safety tip. If you winch or pull anything with
> a steel cable, always place a heavy jacket or blanket
> on the cable, in the middle of it. If the cable should
> break..the blanket will make the cable drop down and
> not fly out of control! I am very uneasy using steel
> cable. When loading tractors on my trailer I try to
> use this technique. Just in case!
> Danny 
>  
>   There is a possibility with the winch you saw
>  advertised,
>  Mike. If you get enough steel cable with it, and you
>  have several
>  sheaves, you could increase the pulling power with
>  them. By using
>  two or three pulleys you can increase the winch's
>  power to the point
>  you can break the steel cable that comes with it.
>  Cecil
>  
> 
> 
> 
> 
> 
> __________________________________
> Do you Yahoo!?
> Friends.  Fun.  Try the all-new Yahoo! Messenger.
> http://messenger.yahoo.com/ 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
> 
>