[AT] Farmall A? question

[pga2 at hot1.net]

Terry,
Do you still have the info for that Parts/Service CD?
I sure could use it. The governor on my '41 B has crapped out.

Phil

> The original block has the same serial number as the tractor. That block was
> cracked on the water jacket behind the manifold and I replaced it with the
> block from a 1948 model C that a list member who lives near by sold to me.
> I will dig the old block out of the shed and see what date it has on it.
>
> Yes, I removed the governor and took it apart.  It has the spring and pin in
> the end of the shaft.
>
> I bought a parts and service manual on a CD from a guy who scanned them.
> This sure makes it easy as I just print up a new page when I get too much
> oil, dirt or grease on the one in the shop.  The parts book shows thw
> governor spring and pin, so it must be an early one that he scanned.
>
> Regards, Terry Welshans

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at