[AJD] JD 530 bracket

[greg at theoldtractorcompany.com]

Duane and I are thinking the same thing. Often equipment was changed for the cotton picker tractors and this might be an example of that. A carefuly study of the parts catalog on the picker might be beneficial.
Greg

Greg Stephen
The Old Tractor Company
Stephen Equipment Company
Box 709
7460 E Hiway 86
Franktown, CO 80116
303-663-5246
303-688-4170 fax


------------------------------------------------
On Mon, 5 Jul 2004 23:12:20 -0400, "Duane Larson" <jdlarson at comcast.net> wrote:

> Ken,
> According to SM2029, the JD electrical service manual, the 530 came with a
> DR 1100309 generator, as was used on the later 50-70 series, and all 20 and
> 30 series.
> 
> While there is no SM for a 530, the SMs for the 50 and 720 both show the
> same method - the puller is placed behind the gear between the bearing and
> differential gear, and the bearing and small gear are pulled together.
> 
> I can't help with the generator bracket - perhaps the parts book for the
> cotton picker might provide that info?
> Regards,
> Duane Larson
> 
> ----- Original Message ----- 
> From: "Kenneth Jones" <kenejons61 at yahoo.com>
> To: "ATIS" <antique-johndeere at lists.antique-tractor.com>
> Sent: Monday, July 05, 2004 9:34 PM
> Subject: [AJD] JD 530
> 
> 
> >     Looking for some assistance on several questions that have come up
> recently while attempting to rebuild my 530.
> >      First, what is the best way to get the bearings off of the ends of
> the differential shaft.  I have used a bearing splitter with a puller but
> the bearing does not budge.  In fact it looks like the bearing cage is
> beginning to deform from the stress of the puller ??
> >     Second, the parts book shows a cast bracket for the generator, part #
> AA6497R.  The generator bracket on this tractor is formed steel and the
> generator does not appear to be the original since it has two pulley's on
> the shaft.  The tractor had been used on a cotton picker, if that makes any
> difference. All my parts books show the cast bracket, any thoughts ??
> >      Third, How or where can I determine the correct model number for the
> generator on this tractor when it was new.  As stated above the generator
> does not appear to be a the original and I need to either rebuild the
> generator or get a rebuilt one but I want to replace it with the correct
> model ..Any assistance would be appreciated
> >
> >
> > Thanks
> > Ken Jones
> > Ken Jones
> >
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > New and Improved Yahoo! Mail - Send 10MB messages!
> > _______________________________________________
> > Antique-johndeere mailing list
> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>