[AT] Speaking of Harbor Freight
charlie hill
chill8 at cox.net
Thu Feb 19 00:03:07 PST 2004
Thanks John. I'll check the cord. I probably wouldn't have thought to do
that unless it looked really small. I think I can afford to replace the
cord. grins.
Charlie
----- Original Message -----
From: <CWI47 at comcast.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, February 18, 2004 9:42 PM
Subject: Re: [AT] Speaking of Harbor Freight
> Charlie, When ya get one of theirs check to make sure the cord is heavy
> enough gauged. I've found with the chinese electrics the cord is usually
to
> small and causes "I think" too much amperage. I know with the 4 1/2"
> grinders if we changed the cords before using they lasted as long as US
made
> but if not then would burn out in a couple or three uses. I'm using a 2HP
> 10" grinder I got from them it's quieter than my delta and really grinds.
I
> changed the cord to heavy industrial when I got it and use it for buffing
> knives and reefin on steel.
> John Cable
> In Lower Slower Western Michigan
> Grand Rapids, MI
> ----- Original Message -----
> From: "Robert L. Holtzer" <rholtzer at earthlink.net>
> To: "Antique tractor email discussion group"
<at at lists.antique-tractor.com>
> Sent: Wednesday, February 18, 2004 9:11 PM
> Subject: Re: [AT] Speaking of Harbor Freight
>
>
> > I've used their small angle grinder. About $20 as I recall. It finally
> > died by the drive gear losing all its teeth! However, it was probably
the
> > best cost/benefit tool I've had in years if not ever. I used it hard
and
> > long. It was noisy but quite functional. I bought another!
> >
> > Bob Holtzer
> >
> > At 07:57 PM 2/18/2004 -0500, you wrote:
> > >Does anyone have experience with H-F's Chicago Electric brand of power
> > >tools?
> > >
> > >At $99.99 someone needs to tell me something really bad to keep me from
> > >buying item 90891-1uxb, 10" compound slide miter saw with 60 tooth
> carbide
> > >blade.
> > >
> > >Charlie
> > >
> > >
> > >_______________________________________________
> > >AT mailing list
> > >http://www.antique-tractor.com/mailman/listinfo/at
> >
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
More information about the AT
mailing list