[Farmall] Woods Mower I.D.

[Freadling, Richard]

Thanks for the info.

-----Original Message-----
From: E. John Puckett [mailto:ejpuckett at centurytel.net] 
Sent: Thursday, December 30, 2004 10:06 AM
To: Farmall/IHC mailing list
Subject: Re: [Farmall] Woods Mower I.D.


None that I know of, but you might ask on www.redpowermagazine.com, or the 
Farmall forum at www.ytmag.com

Freadling, Richard wrote:

> John , I saw the site for the IH cubs, Is there one for the C or Super 
> C. Thought I could pick up some information for a back blade. Thanks 
> Rick Freadling FreadlingR at GOJO.com
> 
> -----Original Message-----
> From: E. John Puckett [mailto:ejpuckett at centurytel.net]
> Sent: Wednesday, December 29, 2004 9:24 AM
> To: Farmall/IHC mailing list
> Subject: Re: [Farmall] Woods Mower I.D.
> 
> 
> Troy, Jim will probably have the correct answer, but I believe LB was 
> low boy. I missed the beginning of this discussion, but if it hasn't 
> already been posted
> you can view the manuals at 
>
http://www.cleancomputes.com/Cub/OEM%20Implement%20and%20Attachment%20Manual
> s/index.html
> 
> Troy Bogdan wrote:
> 
>>OOps, I forgot, I had one more question.
>>
>>On the web site it has manuals for two #59 mowers, The 59 C-2 and the
>>59-LB (Lawnboy??)??  It doesn't have the L-59-A (which I think mine 
>>is).
>>
>>Can I safely assume this is the same deck I have with a few minor
>>changes for later model tractors, or am I off in that assumption.  You 
>>know what they say when you assume . . . you make an ass out of you 
>>and me!
>>
>>Thanks,  Troy
>>
>>on 12/29/04 6:43 AM, Troy Bogdan at tbogdan1 at earthlink.net wrote:
>>
>>
>>
>>>Well, I finally got around to measuring my mower, and I still can't
>>>identify it.  According to the chart, below,
>>>
>>>WOODS MOWER MODEL IDENTIFCATION CHART
>>>WOODS Mower Model    Identification Features
>>>42     42" Cut, Single Spindle, rotating clockwise, RH discharge, single
>>>belt drive
>>>L42    42" cut, Single Spindle, rotating counter clockwise, LH discharge,
>>>single belt drive
>>>59    5'cut, 3 spindle, clockwise rotation, RH discharge, 3 groove center
>>>pulley
>>>L59    5'cut, 3 spindle, counterclockwise rotation, LH discharge, single
>>>belt
>>>L306     6' cut, 3 spindle, counterclockwise rotation, LH discharge, 3
>>>groove center pulley, single belt
>>>L503    5'cut, 3 spindle, counterclockwise rotation, LH discharge, single
>>>belt
>>>
>>>When I measured, I came up with a deck that is 60" (5' Cut) wide in
>>>the front, 25" long on the side and it has three spindles.  I forgot 
>>>to check for counter or clockwise motion.  Also, when you count 
>>>spindles, does that include center pulley or not?  I assumed yes, and 
>>>I think my center pulley is three grooves.  It is a right-hand 
>>>discharge.  So I believe that you may have it, when you said an L-59 
>>>Jim.  What is the "A" designation in your guess of L59-A (Does that 
>>>just mean Model A??)?.
>>>
>>>Do all agree??  Thanks, Troy in PA
>>>
>>
>>
>>_______________________________________________
>>Farmall mailing list
>>http://www.antique-tractor.com/mailman/listinfo/farmall
>>
>>
> 
> 

-- 
John
another one of them
*.?-!.* cub owners _______________________________________________
Farmall mailing list http://www.antique-tractor.com/mailman/listinfo/farmall