[AT] Case VAC parts needed

[Louis Spiegelberg]

I have new manifolds available for the VAC.  If you are interested you can
reply to me off list.  

Lou

Spiegelberg Restoration and Service, LTD.

440-965-7679

<mailto:sales at srstractor.com>    

http://www.srstractor.com/
 

-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Easley, Greg
Sent: Monday, December 20, 2004 10:46 AM
To: Antique tractor email discussion group
Subject: RE: [AT] Case VAC parts needed


Nope.  DC motor is much bigger.  Don L. should have those.

-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Frank
Sent: Thursday, January 20, 2005 9:42 AM
To: Antique tractor email discussion group
Subject: Re: [AT] Case VAC parts needed


Greg:
Are the manifolds the same as a DC?
if so... do you have?

Frank
gremaux at tein.net
Central Montana
http://www.angelfire.com/mt/deeregp/index.html
----- Original Message ----- 
From: "Easley, Greg" <EasleyG at health.missouri.edu>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Monday, December 20, 2004 7:59 AM
Subject: RE: [AT] Case VAC parts needed


> Try Don Livingston  manifold at smig.net
> Case/IH dealer may be worth a try also.
> 
> I've got three complete VAC heads that I'd be willing to part with if
> he's not able to come up with a set of pushrod tubes.
> 
> Greg
> http://www.geocities.com/heartland/woods/1416
> 
> 
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Rob Wilson
> Sent: Sunday, December 19, 2004 10:22 PM
> To: 'Antique tractor email discussion group'
> Subject: [AT] Case VAC parts needed
> 
> 
> Hi guys,
> A buddy of mine is working on a VAC Case engine that was
> the unlucky recipient of being left in a shop caustic acid cleaning
tank
> for seven years. Yep you read right 7 years! The owner shut the doors 
> one day with the engine in the hot tank and left it there. Well he's
got
> it about done but needs some parts. He is looking for a set of the
push
> rod tubes that go in the head. He would prefer a new set but a good
used
> set would work too. If anyone has any to
> sell please let me know. 
> Thanks,
> Rob
> 
> _______________________________________________
> AT mailing list http://www.antique-tractor.com/mailman/listinfo/at
> 
>

_______________________________________________
AT mailing list http://www.antique-tractor.com/mailman/listinfo/at

_______________________________________________
AT mailing list http://www.antique-tractor.com/mailman/listinfo/at