[AT] Ford 8 N

[crawler]

I have all those parts for the Fords. Just email me for a qoute. Thanks  Ed
http://www.crawlerheaven.com/index.htm
----- Original Message ----- 
From: "Mike Sloane" <mikesloane at verizon.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Tuesday, December 07, 2004 8:21 AM
Subject: Re: [AT] Ford 8 N


> Hydraulic Lifters? The 8N has a flat head engine that was first used in
> the 1939 9N. Hydraulic lifters weren't even dreamed of back then. :-) It
> is pretty common for the lifters so wear out and not all that hard to
> replace, once you remove the hood, manifold, head, etc. You need to buy
> a pair of inexpensive special adjusting wrenches. And you might think
> about replacing all of them if you go to all that trouble (and check the
> valves out too). Just hope that you don't have to drop the oil pan, as
> that required removing the front axle. Also, think about joining the
> ATIS Ford-Ferguson list - there is at least on guy who can get Ford
> parts for you at a pretty good discount.
>
> Mike
>
> Richard Fink Sr wrote:
> > I have a gentlemen that wants to sell me a Ford 8N. he says it is a 48
> > and needs a valve lifter. did they have lifters in them. hyd or solid.
> > Thanks
> > R Fink
> > PA
>
> -- 
> Mike Sloane
> Allamuchy NJ
> mikesloane at verizon.net
> Images: <www.fotki.com/mikesloane>
>
> The greatest of faults, I should say, is to be conscious of none.
> -Thomas Carlyle, writer (1795-1881)
>
>
> -- 
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.289 / Virus Database: 265.4.6 - Release Date: 12/05/2004
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>