[AT] Pitman rivets?

[charlie hill]

Thanks Steve.  I think we had a discussion on the list a few years ago about
making coke but unfortunately I can't remember the details now.  However,
I'm in no hurry to make up a batch so no need to worry about the details
now.

Charlie
----- Original Message ----- 
From: "Steve W." <falcon at telenet.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, August 18, 2004 10:52 AM
Subject: Re: [AT] Pitman rivets?


> Usually I get a ton of coal delivered once a year or so. Then run it
> through a crusher so it is about #2 size. Toss it in the forge green and
> make coke. Buying pea coal is usually MUCH higher in price than finding
> a small crusher. I power the crusher with the H.
>
> I have two home built coal forges. One uses a 15" auto wheel and the
> other I built out of a tractor trailer rim.
>
> Steve Williams
> Near Cooperstown NY
>
>
> ----- Original Message ----- 
> From: "charlie hill" <chill8 at cox.net>
> To: "Antique tractor email discussion group"
> <at at lists.antique-tractor.com>
> Sent: Wednesday, August 18, 2004 6:56 AM
> Subject: Re: [AT] Pitman rivets?
>
>
> > Sounds like a good plan for a forge Steve!  Where do you get your coke
> or do
> > you use charcoal or ???
> >
> > Charlie
> > ----- Original Message ----- 
> > From: "Steve W." <falcon at telenet.net>
> > To: "Antique tractor email discussion group"
> <at at lists.antique-tractor.com>
> > Sent: Wednesday, August 18, 2004 2:33 AM
> > Subject: Re: [AT] Pitman rivets?
> >
> >
> > > Make them out of 3/8" rod if you cannot find any. Just heat it red
> and
> > > form the head shape. Then peen the other end.
> > > I've made a LOT of odd rivets that way. Comes in handy to have that
> > > small forge in the shop. If you don't have one you can build one
> REAL
> > > easy from a 15-16" STEEL car rim and an old computer blower and an
> > > iron/steel 4" T fitting and some misc. steel for legs and gratings.
> > >
> > > Steve Williams
> > > Near Cooperstown NY
> > >
> > >
> > > ----- Original Message ----- 
> > > From: "Larry D Goss" <rlgoss at evansville.net>
> > > To: "'Antique tractor email discussion group'"
> > > <at at lists.antique-tractor.com>
> > > Sent: Tuesday, August 17, 2004 11:54 PM
> > > Subject: [AT] Pitman rivets?
> > >
> > >
> > > >
> > > > Help!  I'm trying to restore a sickle bar mower for my 1947
> Economy
> > > > tractor.  Economy Engineering (later to become Power King) bought
> much
> > > > of the assembly from McCormick-Deering.  The bar and pitman are
> > > > essentially a Model 6 -- first made in 1922.  I'm in the process
> of
> > > > building a new pitman for it, but I need rivets -- 3/8" diameter
> > > button
> > > > head with a pre-installed length of 2-1/4 and 2-1/2 inches.
> > > >
> > > > Of course, nobody has them.  I checked McMaster-Carr and they
> don't
> > > list
> > > > any thing longer than 1".  I'm apparently going to have to rely on
> > > some
> > > > NOS rivets or somebody's leftovers in their shop, or (heaven
> forbid)
> > > > I'll have to bolt the straps to the pitman wood.  Does anyone have
> a
> > > few
> > > > or know a source for them?  I only need three of each.
> > > >
> > > > Larry
> > > >
> > > >
> > > > _______________________________________________
> > > > AT mailing list
> > > > http://www.antique-tractor.com/mailman/listinfo/at
> > > >
> > >
> > > _______________________________________________
> > > AT mailing list
> > > http://www.antique-tractor.com/mailman/listinfo/at
> >
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>