[AJD] ATTN:Dennis Cotton (!)-JD cylinders-Interesting day

Cotton Family dcotton at coosahs.net
Thu Aug 26 05:20:36 PDT 2004


I wish I had days like that.  Now if you could poke around and find a
40C with a 3 point, I would drive out there in a heartbeat. Lol.  
The F82?r must be for the G as the one in the 70 parts book list the
numbers as F1425r.  What a nice find.

-----Original Message-----
From: antique-johndeere-bounces at lists.antique-tractor.com
[mailto:antique-johndeere-bounces at lists.antique-tractor.com] On Behalf
Of greg at theoldtractorcompany.com
Sent: Wednesday, August 25, 2004 11:35 PM
To: Antique John Deere mailing list
Subject: [AJD] ATTN:Dennis Cotton (!)-JD cylinders-Interesting day

Today I was out poking around one of my storage areas and I ran across
some new JD hydraulic cylinder housings.
As I wrote the part #'s on my hand about 8 hours ago and I HAVE washed
them these are my best guess at what the casting #'s are. It's far too
late to dig through the parts books tonight
Anyway, here goes
R2135R
F82?R
A3763R
Remember, these are probably useful only to designate that one is from
the 730/830 series, one is  a G/70 and the other is A/60 etc.
The A# is a complete cylinder and is new from what I could see. There
are remants of a wire tag still wired to one of the yokes and spider
webs/paint inside the pin holes so I think it is new

Also ran across my NOS front round spoke wheel which I had misplaced
several years ago. Looks like one of my "helpers" took it upon himself
to move it to storage. I think it is a 16" and is an AC prefix part #
which was GP and/or A I think, still has the cardboard parts tag wired
to it. Think it might find it's way to Ebay.

Ran across a new crank, used 4 cylinder pony parts, lots of NOS main
bearing housings w/bearings and more. Wish I had it all inventoried but
it's sure fun to go poke around. Time has a way of getting away though
when I do make a point to go look

Interesting day
Greg

Greg Stephen
The Old Tractor Company
Stephen Equipment Company
Box 709
7460 E Hiway 86
Franktown, CO 80116
303-663-5246
303-688-4170 fax


------------------------------------------------
On Sat, 21 Aug 2004 12:44:19 -0500, "Duane Ledford"
<dledford at classicnet.net> wrote:

> Terry,
> 
> Can't do you much good on the cutaway, but was glad to hear that
Pioneer
> Village is still up and running. Went there with my folks a couple of
times
> as a kid. Was really impressed with the displays. Barns and barns of
old
> cars, trucks, tractors, steam engines. My mom and sister got so tired
of
> looking at these things. Complained that dad and I had to count every
> sparkplug on every vehicle. As I remember there were displays of
quilts,
> furniture, etc also. Didn't spend much time in those places. (grin)
Been
> talking about making the trek up there again some day. Kind forgot how
many
> spark plugs there were!! Need to refresh my memory.
> 
> Duane
> 
> ----- Original Message ----- 
> From: "Terry L. Hrdlicka" <th01209 at alltel.net>
> To: <antique-johndeere at lists.antique-tractor.com>
> Sent: Friday, August 20, 2004 11:52 PM
> Subject: [AJD] Styled A "Cut Away"
> 
> 
> > Hello all,
> >
> > Just got back from Pioneer Village in Minden, NE.  Saw an early
styled A
> > with cut out areas all over so you could see the internal workings
of
> > the engine, clutch, tranny, etc.  No explanation about where it came
> > from or anything.  Was this something that Deere put out to dealers,
or
> > something someone made?  The Serial # plate had 412549, but I doubt
that
> > was the correct plate, as that would make it an early unstyled, and
the
> > rivets were loose.
> >
> > Anyone shed a little light on this?
> >
> > Terry
> >
> >
> > _______________________________________________
> > Antique-johndeere mailing list
> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >
> 
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 
_______________________________________________
Antique-johndeere mailing list
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere




More information about the AT mailing list