[AT] IH engine identification/More Info

[JParks]

Thanks a bunch Phil and Greg!   This will get the guy off my back as my ag
tractor knowledge is pretty low. (but improving!)

John Parks
Boise, ID
----- Original Message -----
From: <pga2 at hot1.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Friday, August 13, 2004 2:52 PM
Subject: Re: [AT] IH engine identification/More Info


> Sounds like a Farmall M grader conversion. The engine would be either a
C248
> or a C264. There should be a cast in C264 on one side of the block if that
is
> the engine. A C248 doesen't have the cast in mark (if CRS isn't involved
here).
>
> Phil
>
> > The gentleman called back today and is modifying his story a
little......it
> > sounds like he has an AG tractor converted to a small grader by adding
the
> > attachments that were so common back in the 40's.  The grader attachment
was
> > made by Trojan while the tractor is International.  He found an ID plate
on
> > the bell housing which he says is "MFBK61692"
> >
> > Can someone tell me what this tractor and engine is!?
> >
> > Thanks
> > John Parks
> > Boise, Id
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>