[AT] IH engine identification

[Ralph Goff]

I didn't realize that Frank. Payloader seems to have become a generic term
used to refer to all makes and brands of this handy piece of construction
machinery. Much like here in Canada where the name "Ski-doo" was used to
describe almost all brands of snowmobile no matter if they were built by
Artic Cat, Sno-Jet, or John Deere.

Ralph in Sask.
http://lgoff.sasktelwebsite.net/

----- Original Message -----
From: Frank <gremaux at tein.net>
To: Antique tractor email discussion group <at at lists.antique-tractor.com>
Sent: Thursday, August 12, 2004 6:03 AM
Subject: Re: [AT] IH engine identification


> Payloader was made by international......
>
> Frank
> gremaux at tein.net
> Central Montana
> www.angelfire.com/mt/deeregp/index.html
> ----- Original Message -----
> From: "Ralph Goff" <alfg at sasktel.net>
> To: "Antique tractor email discussion group"
<at at lists.antique-tractor.com>
> Sent: Wednesday, August 11, 2004 9:42 PM
> Subject: Re: [AT] IH engine identification
>
>
> > John, a local guy here has a Trojan payloader. I was surprised to see
that
> > its engine is an IH 6 cylinder gas much like those in my IH trucks. I
> > believe it was a BD 264.
> > Not sure what your 4 cylinder in the grader would be. Likely from a
> tractor
> > as the trucks never had a 4 cyl.
> > Well, not until the 60s anyway. Most of the IH six cyl truck engines can
> be
> > identified by the stamping on the upper right hand corner of the engine
> > block just below the exhaust manifold.
> >
> > Ralph in Sask.
> > http://lgoff.sasktelwebsite.net/
> >
> > ----- Original Message -----
> > From: JParks <jkparks at flash.net>
> > To: Antique tractor email discussion group
<at at lists.antique-tractor.com>
> > Sent: Wednesday, August 11, 2004 6:25 PM
> > Subject: [AT] IH engine identification
> >
> >
> > > I ran across a new one (to me) today.  A Trojan motor grader, equipped
> w/
> > a
> > > 4 cyl gas IH
> > > engine.  This is an oldie from what the owner tells me and I talked to
> > some
> > > of my grader friends, and they have never run across one either.
> > >
> > > I would like some help identifying the engine.  Casting number on the
> > > cylinder block is 6227D.  Can anyone tell me what this engine (model)
> is!?
> > >
> > > Thanks for any assistance.
> > >
> > > John Parks
> > > Boise, Id
> > >
> > >
> > >
> > > _______________________________________________
> > > AT mailing list
> > > http://www.antique-tractor.com/mailman/listinfo/at
> >
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
> >
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at