[AJD] Decal Placement

[Merle W. Johnson]

None of them send good instructions with their decals.  For the price you pay I
expect more than a badly reproduced sheet of paper.  I use a local sign maker
for some decals and they are much better quality plus he'll install them.  Has
to be stuff that doesn't need mother deeres approval.
Merle

David and Shelly Battenberg wrote:

> Duane,
>
> I am also in the process of placing decals on my 1940 H and actually was
> wondering the same.  I got my decals from Jorde and also have the decal you
> are referring to.  On the picture I received from Jorde noting the placement
> it says to put in on the "differential cover".  Hope this helps.  I have PTO
> on mine, so placement may be different?
>
> David Battenberg
> Clintonville, WI
> ----- Original Message -----
> From: "Duane Ledford" <dledford at classicnet.net>
> To: "Antique John Deere mailing list"
> <antique-johndeere at lists.antique-tractor.com>
> Sent: Saturday, August 07, 2004 11:04 PM
> Subject: Re: [AJD] Decal Placement
>
> > Duane,
> >
> > That's the decal. That's where I thought it should be, but will check with
> > K&K Monday to be absotively shure.  Thanks for the info.
> >
> > Duane Ledford
> >
> > ----- Original Message -----
> > From: "Duane Larson" <jdlarson at comcast.net>
> > To: "Antique John Deere mailing list"
> > <antique-johndeere at lists.antique-tractor.com>
> > Sent: Saturday, August 07, 2004 10:49 PM
> > Subject: Re: [AJD] Decal Placement
> >
> >
> > > Duane,
> > > A 1939 H advertising booklet shows a decal  which looks like
> > >
> > >     John     Deere
> > >         pix of leaping deere
> > > Moline     ILL
> > >
> > > and it is placed on the back cover centered between the bottom 4 bolts
> > > holding the cover on.  The words John Deere are placed at an angle in
> the
> > > usual way.
> > >
> > > However, it is a faint pix and it would be good to verify with Kent
> before
> > > placing it on.
> > > Regards,
> > > Duane Larson
> > >
> > > ----- Original Message -----
> > > From: "Duane Ledford" <dledford at classicnet.net>
> > > To: <antique-johndeere at lists.antique-tractor.com>
> > > Sent: Saturday, August 07, 2004 10:37 PM
> > > Subject: [AJD] Decal Placement
> > >
> > >
> > > Putting the decals on my 1940 H this afternoon when I ran into a
> problem.
> > > The decals I received from K&K included a "leaping deer" decal. The
> > > instructions say that it goes on the transmission housing and that it
> was
> > > for the 1939 and 1940 models only. I can see no place on the
> transmission
> > > housing that this decal could fit. The only place that it would fit
> would
> > be
> > > on the crankcase cover or the rear end cover. Was there possibly a
> serial
> > > number break in 1940 where they changed the configuration of the
> tractor.
> > I
> > > know that the  '39's were different than all the rest. Any insight would
> > be
> > > helpful. I'll call K&K Monday about this, but thought I could get some
> > help
> > > from all of you before then.
> > >
> > > Thanks,
> > > Duane Ledford
> > > _______________________________________________
> > > Antique-johndeere mailing list
> > > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> > >
> > > _______________________________________________
> > > Antique-johndeere mailing list
> > > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> > >
> >
> > _______________________________________________
> > Antique-johndeere mailing list
> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere