[AT] WD45 charging problems

DAVIESW739 at aol.com DAVIESW739 at aol.com
Sun Aug 1 20:58:47 PDT 2004


I put this on the list once before and George  blew his lid I hope he's all 
back together now.
>From the Case LA  manual
----------------------

Generator
The generator is belt  driven, adjustable
third brush type, with charging rate con-
trolled by a  "two-rate" regulator. As adjusted
at the factory, the generator charges  approxi-
mately 11-14 amperes when the battery is
only partly charged, but  when the battery
approaches full charge the two-rate  regulator
automatically reduces the charging rate to
approximately 3  amperes, which is sufficiently
low to prevent over-charging.
Charging rate  is adjusted by shifting the
position of the "third" brush, which is  reached
by removing the cover band on the rear end
of the generator; the  movable third brush is
on top, somewhat toward the engine. Moving
the  third brush in the same direction as the
rotation of the generator armature  increases
the charging rate. Baffle plate shown in Fig.
21 is used to  prevent generator from being
heated by exhaust manifold.
NOTE: No Warranty  Service Work will be
approved should it be done on Electrical
Equipment by  any one other than an author-
ized Electrical Equipment Service Station,  as
they have all the necessary tools and equip-
ment to do this work in a  satisfactory manner
and are familiar with handling  Electrical
Equipment.
----------------------------------
I hope that  this will help.

Walt Davies
Cooper Hollow Farm
Monmouth, OR  97361
503 623-0460  




More information about the AT mailing list