[AT] Used aluminum pistons?? - NO GO!
Dean VP
deanvp at att.net
Wed Apr 28 07:33:41 PDT 2004
Walt/Greg:
Thank You both. I was concerned about the wear issues. You verified my
suspicions. I haven't overhauled enough engines to be that observant but
they were suspect to me. Thanks for the help. I have decided not to buy
them.
Dean A. Van Peursem
Snohomish, WA 98290
A failure establishes only this, that our determination to succeed was not
strong enough.--John Christian Bovee
www.deerelegacy.com
http://members.cox.net/classicweb/email.htm
-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of
DAVIESW739 at aol.com
Sent: Tuesday, April 27, 2004 10:10 PM
To: at at lists.antique-tractor.com
Subject: Re: [AT] Used aluminum pistons??
Their shot warn out beyond saving, unless you need them real bad and there
aren't any others around then I'd pass on these. you can see the wear on the
side of the piston it looks real deep and without looking I would bet that
the
ring grovves are worn beyond specs. These pistons have run without good
oiling
that is obviuos.
Walt Davies
Cooper Hollow Farm
Monmouth, OR 97361
503 623-0460
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at
More information about the AT
mailing list