[AT] 630 JD is home and running

[jfgrant]

Well send me your address and I'll send a sketch. Sorry but my camera
downloading software took a vacation.  jg
----- Original Message ----- 
From: "Ricky Prescott" <diamondp at centex.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Tuesday, April 27, 2004 12:27 PM
Subject: Re: [AT] 630 JD is home and running


> I would like to see the sketch please.  Ricky
> ----- Original Message -----
> From: "jfgrant" <jfgrant at triton.net>
> To: "Antique tractor email discussion group"
<at at lists.antique-tractor.com>
> Sent: Tuesday, April 27, 2004 11:22 AM
> Subject: Re: [AT] 630 JD is home and running
>
>
> > Rick, yes there is a bushing that can be replaced. HOWEVER, DON"T try to
> > drive it out with a hammer, punch or whatever. There is a good chance
that
> > you will break the casting and then $$$$$$$. There is a simple
> > extractor/installer tool that can be made to do this task. If you need a
> > sketch or more info let me know.  A new bushing will make a lot of
> > difference. Good Luck.  JG
> > ----- Original Message -----
> > From: "Ricky Prescott"
> >
> >
> > > One thing wrong with the hand clutch is the handle has lots of wobble
in
> > it.
> > > Is there a bushing that can be replaced at the pivot point in the hand
> > > clutch handle?
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>