[AT] trailer lights

[charlie hill]

It is a fairly simple task to run your own ground wires back to the trailer
connector.  You can do this by attaching them to the ground pig tails
intended to be grounded to the trailer or by attaching a ground directly to
the light frame for those intended to ground through the frame.

Charlie

----- Original Message ----- 
From: "Wayne Snelling" <wsnelling at southplainscollege.edu>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, April 28, 2004 12:23 PM
Subject: Re: [AT] trailer lights


> Greg:  I have bought many lights at TSC and they all have a ground wire.
> However, that ground wire is of no affect if you have a rusted
> connection between the trailer and the vehicle pulling it. I have found
> using grease on my ball hitches makes for excellent connection every
> time and the grounded lights on the trailers work fine. That is until
> you loan it out and it comes back with jerked off and cut wires.
>
> Wayne
>
> >
> >
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>