[AT] 630 JD is home and running

[Ricky Prescott]

I would like to see the sketch please.  Ricky
----- Original Message -----
From: "jfgrant" <jfgrant at triton.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Tuesday, April 27, 2004 11:22 AM
Subject: Re: [AT] 630 JD is home and running


> Rick, yes there is a bushing that can be replaced. HOWEVER, DON"T try to
> drive it out with a hammer, punch or whatever. There is a good chance that
> you will break the casting and then $$$$$$$. There is a simple
> extractor/installer tool that can be made to do this task. If you need a
> sketch or more info let me know.  A new bushing will make a lot of
> difference. Good Luck.  JG
> ----- Original Message -----
> From: "Ricky Prescott"
>
>
> > One thing wrong with the hand clutch is the handle has lots of wobble in
> it.
> > Is there a bushing that can be replaced at the pivot point in the hand
> > clutch handle?
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>