[AT] Farmall Fast Hitch

[Al Jones]

All the mounting holes for a fast hitch are there.  I think a fast hitch
from a 200 or a Super C would be your best bet.  The 230 fast hitch is a
tad different with the traction control feature and MAY not bolt up.  

Al

-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of
HaliganBar at aol.com
Sent: Monday, April 12, 2004 9:59 AM
To: at at lists.antique-tractor.com
Subject: Re: [AT] Farmall Fast Hitch

Leroy;

I think that the mounting holes are already cast in to the back of the 
differential housing. All you need to do is find the proper sized fast
hitch and 
bolt it up.Then run the hydraulic lines for the lift cylinder and the
linkage on 
the left side to tip the hitch.

Good luck,
Karl 

In a message dated 4/11/04 3:33:13 PM Eastern Daylight Time, 
leroy_price3 at hotmail.com writes:

<< s it possible/Hard to install a fast hitch on a Farmall 200 which
doesn't 
 have one?
 
 Of course, it might be better to put an after market 3 pt on it.
 
 Don't have a 200 yet....
 
 LeRoy >>
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at